1. Manual Number 4330 Mitutoyo Manual

Manual Number 4330 Mitutoyo Manual

FeaturesMitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.It keeps track of its origin point once set. Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement. No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors. Large and clear LCD readout.

The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point). Data Hold Unit (959143) is optional. Carbide-tipped jaw type calipers are also available.

With thumb roller. Except 500-500-10, 500-501-10,500-502-10. Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.Technical DataAccuracy: Refer to the list of specificationsResolution: 0.01mm or.0005'/0.01mmRepeatability: 0.01mm /.0005”Display: LCDLength standard: ABSOLUTE electrostatic capacitance typelinear encoderMax. Response speed: UnlimitedBattery: SR44 (1 pc.), 938882Battery life: Approx. 3.5 years under normal useFunctionOrigin-set, Zero-setting, Data output, inch/mm conversion(inch/mm models ONLY)Alarm: Low voltage, Counting value composition errorOptional Accessories959143: Data hold unit959149: SPC cable with data switch (1m / 40”)959150: SPC cable with data switch (2m / 80”).without SPC data output.